Malossi RS24 Front Shock for Vespa ET, LX, LXV and 5 50-150

Malossi RS24 Front Shock for Vespa ET, LX, LXV and 5 50-150
larger image

Malossi RS24 Front Shock For Vespa 50-150cc ET4, ET2, LX150, LXV 150, LX 50, S 150 and S50. 

MALOSSI is the best that the scooter tuning market currently has to offer in the area of engine tuning. It is therefore perfectly reasonable that MALOSSI has also given some thought to the area of suspension optimisation. For decades now MALOSSI have had their 'RS' series of shock absorbers produced by PAIOLI. The result is the almost unbelievably high quality and precision of these shock absorber units. MALOSSIs experience on the race circuits flows directly into the development of their products and it shows. This means that in addition to racing enthusiasts, everyday Vespa drivers can now access and benefit from these high end products. 
 
The RS24 is the evergreen of the range and one of the most wanted in the ESC and other racing series. Its compact design belies its high tech interior. The damping process takes place in two seperate chambers, one filled with gas, the other with oil. This ingeniuos solution makes the use of a seperate external reservoir redumdent. The spring preload is continous and the damping feature has 24 adjustment possibilities. With the PK conversion steering column, the shock will also fit into all classic smallframe models.It is a regenerable oleo gear with bi-lamination piston and baffle plate compensation.

36-mm piston with two independent lamellar packs, one in extension and one in compression; lamellar system made of harmonic steel with leaf spring configuration;

LUBRIFLON-PTFE B70 piston runner guide (bronze-loaded modified compound);
Sliding on GUIDA DU guide bushing (a composite material obtained by sintering a layer of spheroidal bronze on a mild steel strap properly treated, followed by impregnation and coating with a mixture of PTFE + PB);
Polyester resin SEALTHANE grade 9345 scraper ring
38NCD4 alloy steel shock absorber rod ø 14 mm, hardened and tempered with hard chrome deposit thickness 25/30 microns (superficial hardness of the untreated shaft HRC 55/60). M467900, PI467900

VESPA ET2
VESPA ET4
VESPA LX 150
VESPA LX 50
VESPA LX 150
VESPA LXV 150
VESPA S 50
VESPA S 150

01/20/22

  • Model: 100-467900

$259.97

Customers who bought this product also purchased...

(image for) Malossi Oil Filter 4 Pack
Malossi Oil Filter 4 Pack
$34.97
(image for) Rubber Bushing for Vespa Rear Shock BOTTOM
Rubber Bushing for Vespa Rear Shock BOTTOM
$2.97
(image for) Oil Filter Mesh for Piaggio Leader
Oil Filter Mesh for Piaggio Leader
$4.97
(image for) Gas Cap Gasket for Vespa, Piaggio
Gas Cap Gasket for Vespa, Piaggio
$4.97
(image for) Rubber Bushing for Vespa Rear Shock TOP
Rubber Bushing for Vespa Rear Shock TOP
$3.49
(image for) Oil Filter Tool for Vespa, Piaggio, Aprilia
Oil Filter Tool for Vespa, Piaggio, Aprilia
$29.97